SEKA Tank trailers

SEKA Tank trailers

SEKA 3-axle tank semi-trailer made of stainless steel for the transport of foodstuffs. Total weight 40t, Highest loading capacity on a 2-axle tractor. Maximum working pressure in the tank is 2 bar, discharge pressure 3 bar.

Structure

Tank constructed from stainless steel sheet material W-No. 1.4301 Gross capacity from approx. 31,000 l, with 3 compartments, 12,000/6,000/13,000 liters Internal support rings stainless steel 1.4301 Compression version 2.0 Bar, cylinder shape Internal WIG weld seam design One closing lid with safety valve per compartment One overflow per cover with drain pipe and fold-away stainless steel cover One bottom valve per compartment with controls at the top. Continuous stainless steel platform, mounted on the right with folding handrail. Handrail section can be operated by folding lower ladder section. All parts made of stainless steel
2 stainless steel hose holder, mounted on the left and right of the tank structure
3 pieces of LED lamps in white on the platform Stainless steel outlet box, mounted at the rear of the chassis

Pipework

  • Central spout DN100, insulated with butterfly valve and blind cover, rear straight in stainless steel cabinet

Cleaning line

  • Centrally mounted cleaning line with 6 permanently mounted nozzles. The nozzles are connected to one central flushing pipe, which ends at the rear in the stainless steel cabinet on the left.

Insulation

  • Tank insulation consisting of polyurethane (K=0.481 W/m2K) with a polished stainless steel insulation plate, 1.4301, plastic caps are mounted at the front and rear.

Tank accessories

  • Pressure pipe with compressor connection at the front right, check valve, manometer, pressure relief valve 2.0 Bar and filter, a manually operated control valve per compartment.

King Pin

  • Total permissible weight: 38,000 kg
  • Chassis weight with superstructure approx. 6,300 kg
  • Dish pressure: 11,000 kg
  • Axle set: 27,000 kg
  • Total length: 10,650 mm
  • Total width: 2,550 mm
  • Chassis length: 10,500 mm
  • Chassis width: 1,450 mm
  • Dish height: 1,150 mm

Chassis

  • Chassis as a composite ladder frame, 2 longitudinal beams in I-shape, front and rear with cross beam construction.

King Pin

  • Kingpin 2" according to ISO 337, interchangeable, one position.

Wheels and tires

  • Lighting system 24 Volt Type ASPÖCK according to guideline 76/756/EWG
  • 1x EBS / ABS socket according to ISO 7638 + CAN
  • 1x 15-pin socket according to ISO 12098
  • 1x 7-pin socket according to ISO 1185
  • 1x 7-pin socket white according to ISO 3731
  • 9 chamber rear lights mounted in rear frame/bumper construction
  • 2 license plate lights mounted in the rear frame
  • 2 pieces of width lighting mounted in the rear frame
  • 2 pieces of width lighting at the front, mounted so that they can be folded away via gas springs.
  • 3 pairs of side marker lamps on chassis, carefully mounted and easily accessible wiring.

Support legs

  • Manually operated 2 x 12 ton telescopic extendable with spindle, two speeds. Controls mounted on the right side.

Axles and suspension

  • Low-maintenance 3-axle unit, type SAF Intradisc with 22.5" disc brakes, load capacity 9 tons per axle. Air suspension system with lifting and lowering device, valves mounted center right. From driving position lower 80 mm and raise 110 mm. Automatic driving mode. Axle 1 designed as a lifting axle.

Texts

  • Inscription "for food only" with SEKA logo
  • Contour marking according to ECE Standard

Brake system

  • Electronic braking system 2S/2M Type WABCO according to EWG 71/320/EWG, consisting of EBS basic module, double release valve with emergency braking function. Aluminum air tanks, equipped with drainage valve. Parking brake acting on two axles via four brake cylinders, with simple operation via double release valve.
  • Diagnostics option via EBS / ABS central box ISO 7638.

Preservation

  • Sandblasting as pretreatment, KTL primer and topcoat via powder coating.
  • Chassis in RAL color of your choice, bumper construction and side shields in anodized aluminum
  • Position lighting arms made of INOX
  • Console for couplings and air connections made of INOX

Connections

  • All attachments are attached with stainless steel mounting material

Colors

  • Bottom of tank in RAL colour: White
  • Chassis in RAL colour: standard Gray RAL 7350

Texts

  • Inscription "for food only" with SEKA logo
  • Contour marking according to ECE Standard
Contact

We would like to hear from you

Do you have any questions or can we help youw with anything? Contact us by sending an email or calling the number below. We are ready to help you!